Manual Z Axis Vertical Positioning Stage Featuring A Hella Tight Cross Roller Guide Rail And Center Micrometer Head For Slick Smooth Linear Motion And Rock Solid Fine Adjustment Control
Single Z Axis Manual Slider With Cross Roller Guide Tracks
✔️ Gauge reads 0.01mm while M3 and M4 bolts grab 40 to 80 mm tracks
This vertical slide assembly brings slick smooth linear motion to your benchtop tools. You gain rock solid fine adjustment control when stacking heavier fixtures. The sealed guide blocks dust and keeps repeat marks dead on.
✅ Cross roller guide rail keeps travel smooth under medium loads✅ Center drive mechanics split force even across the carriage plate
✅ Alloy probe marks crisp zero point step through repeated moves
✅ M3 holes fit thin frames while M4 bolts grab heavy base units
✅ Single sliding table arrives ready to bolt straight onto your rig
💡 How does a cross roll design stay handy for quick axis swaps on heavy tooling?
A stiff base locks your part in place while you dial in depth measurements.
- Pin arrays stop side play when you push past the middle travel range
- Center threaded rods balance torque and keep the carriage tracking straight
- Laid out dial faces drop sharp graduations so you skip guessing games
- Roomy mount zones slide into standard frames and keep your station neat