Pro Grade Full Flush Side Cutters Deliver Dead On Precision And Slick Wire Cutting For Soft Metals And Jewelry Projects Creating Clean Burr Free Edges So You Can Handle Nitty Gritty Details Effortlessly Using Heavy Duty Tools For Peak Performance
Precision Flush Side Cutters For Soft Metal Wire Making
✔️ Max capacity handles 0.9 mm aluminum for clean flat wire separation
You receive a single unit of Italian manufactured pliers built to slice through fine jewelry supplies and craft components. These hand tools belong right in your workbench organizer next to your wire gauges and benches. You will reach for them constantly when trimming headpins or shaping wire into clasps and charms. The tightly mating blades crush material rather than tearing strands, giving you a polished surface without extra steps.
| Material | Max Wire Diameter | Notes |
|---|---|---|
| Soft Yellow Gold | 0.7 mm | Optimal for achieving full flush cuts on soft gold. Exceeding this may compromise flushness or tool life. |
| Sterling Silver | 0.6 mm | Due to its hardness, a smaller diameter is recommended for the best full flush result. |
| Copper | 0.8 mm | Softer than silver, allowing for a slightly larger diameter while maintaining a flush cut. |
| Brass | 0.6 mm | Similar to sterling silver in cutting difficulty for a full flush finish. |
| Aluminum | 0.9 mm | Very soft, allowing for a relatively larger diameter while achieving a very clean cut. |
✅ Tightly ground edges slide along both sides of the cut wire to kill manufacturing spikes
✅ Sharp stainless steel faces handle delicate project pieces without chipping or rolling
✅ Straight cutting path guides your fingers safely away from flying metal fragments
💡 Why choose full flush side cutters over standard diagonal blades for soft wire?
This slicing design removes sharp edges so you skip filing and sanding steps completely.
- Pressing plates meet perfectly flush to deliver mirror smooth termination faces
- Narrow clearance gap stops material buckling so your measured lengths stay accurate
- Cushioned lever action takes strain off your knuckles during heavy fabrication sessions
| Material | Max Wire Diameter | Notes |
|---|---|---|
| Soft Yellow Gold | 0.7 mm | Optimal for achieving full-flush cuts on soft gold. Exceeding this may compromise flushness or tool life. |
| Sterling Silver | 0.6 mm | Due to its hardness, a smaller diameter is recommended for the best full-flush result. |
| Copper | 0.8 mm | Softer than silver, allowing for a slightly larger diameter while maintaining a flush cut. |
| Brass | 0.6 mm | Similar to sterling silver in cutting difficulty for a full-flush finish. |
| Aluminum | 0.9 mm | Very soft, allowing for a relatively larger diameter while achieving a very clean cut. |