Heavy Duty Handheld Plate Beveler With 1HP 110V Motor For Clean Burr Free Edges Up To 7/8 Inch Max Beveling Adjustment Built Damn Solid For Smooth Angled Cuts Without The Dust Or Smoke Keeping Shop Grind Tight

Regular price $3,993.00 Sale price$5,000.00you save $1,007.00
UPC:





Heavy duty plate beveler makes precise metal prep easy
✔️ 1 horsepower 110 volt drive creates smooth angled cuts daily

You receive a single ready-to-run plate beveler in the box. This handheld unit tackles your welding prep jobs on mild steel plates. You get clean V-grooves in seconds without smoke or dust choking your shop. Just guide it along the seam and lock in your cut angle.

✅ Adjustable cutting arc covers fifteen to forty five degrees
✅ Takes material down to an eighth inch minimum thickness
✅ Powered via six foot cord with standard three prong plug
✅ Comes packed with ten square C-5 carbide cutting inserts

💡 What is the most reliable method to machine a consistent V-bevel for heavy steel plate welding
To get the edge geometry right matters more than rushing straight to the arc. You save filler and gas when you mill a uniform groove first. Here is a handy workflow for tight tolerances.
- Secure the plate beveler firmly onto a flat workpiece surface
- Dial in the depth control knob until the cutter clears the seam
- Guide the machine slow enough to let the sharp carbide take full loads
- Rotate fresh cutting faces daily to maintain steady chip formation

✝️